What can be done from scraps of plastic pipes. As a preface. A simple and convenient tablet for drawing

Plastic pipes - one of the most popular materials for crafts. And this is quite natural: they are generally available, inexpensive, cutting and installation do not require special skills and special equipment.

Particularly harmonious crafts made of plastic pipes with their own hands will look like in the country. We share a selection of fresh ideas that motivate creative experiments.

1. Water procedures

On a hot summer day, so I want to refresh myself at the cottage, quickly and conveniently. This will help the shower of plastic pipes. To the construction of plastic with holes it is necessary to attach a watering hose. It only remains to turn on the water and enjoy the pleasantly cool.

2. Comfortable seats

The more plastic pipes will go into the design of a chair or a chaise longue - the more weight it will be able to withstand. If you need a highchair for a child, then a minimum number of pipes is sufficient, and the seat can be made of a dense fabric. Deckchair for an adult is best made entirely of plastic.

3. Air beds

Even the most ordinary walls of the cottage, made of ordinary building blocks, will transform the suspended flower beds. Such artifacts from plastic pipes for a summer residence can make and the child. Pipes with holes, plugs covering their side parts, and metal fasteners are all that will be needed for making unusual flower beds.

4. Quickly dry things - it's easy

It's worth spending a little time - and from plastic pipes it will be possible to make a compact dryer for clothes. Such a product will weigh very little, so it is easy to put it in the most lit place on the site.

5. To make the strawberry tastier than the neighbors

Often happens that strawberries, grown in the usual way - in the garden, matures unevenly and can even bend. After all, on one side of it the sun can not fall at all, because often the fruits lie on the ground or are under the leaves. The vertical bed of a piece of a large diameter plastic pipe will help to solve the problem. Strawberry as a curling plant will certainly find a way out - through the holes in the plastic.

6. Plastic fence

Doing an external fence, separating the street from the infield, from plastic pipes - perhaps not the best idea. But to protect them with a pen for animals or another cottage zone is a decision that will be reasonable. To give this mini-fence a resemblance to the present, paint it with a silvery paint.

7. A fabulous place for friendly gatherings

From the pipes it is easy to assemble an unusual pavilion, which for sure will become a favorite place for summer rest. Pull between rope pipes and plant under them climbing plants, for example, ivy. When he grows up - it will be pleasant to be in a gazebo even on a sunny day. To make the gazebo look more picturesque, use pipes of brown color.

8. Effective watering system

Watering a lawn or another large area in the country is not the most exciting activity. Release from it will help the irrigation system for giving of plastic pipes. Simply move the water hose to several connected pieces and turn on the water. If you make the holes small - you get a system of drip irrigation.

9. Simple and mobile greenhouse

Thin tubes become the main material for the manufacture of greenhouses. The main advantage of such an article for a dacha from plastic pipes is its mobility. At the end of the summer season, the greenhouse is easy to disassemble, and the next - to mount again in any chosen place.

A flower bed made of plastic pipes.

Growing seedlings - it's pretty troublesome. Make this process more organized and convenient will help the flower bed of plastic pipes. If you spend a little more time, you can bring water to it, and then the process of watering the seedlings will become automated. It is enough to make holes in the bottom of the containers, in which plants are planted.

12. Funny swings

Plastic pipes, in which the ropes holding the swing are passed, will become comfortable handrails. The scheme for making such a swing is quite simple. Eight sections of pipes with holes, rope and board - this is all that will be needed for their manufacture.

Fencing for the place where children play.

Most children are crazy about staying at the cottage and playing in the fresh air. But the backyard is also a source of many potential dangers. And parents are involved in caring for plants, it is difficult to keep track of children. A fence of plastic pipes, tightened by a grid, will help. Small children can not go beyond the territory intended for games.

15. That the flowers were in sight

Decorate the terrace or veranda with flowering plants is a great idea. But to take out a lot of pots and place them in different places can be a tedious task. Solve the problem with a stand for flowers from plastic pipes. It weighs very little, so rearranging it if necessary is very easy.

Onions from plastic pipes.

Depending on the type, some pipes can be easily bent. This is possible if the product is of a small diameter and made of flexible plastic. If the pipe can not be bent, it can be slightly heated. For example, a construction hair dryer or over an open flame.

Having made, remain unused parts. These extra meters, which are bought and not useful. Small, left after pruning. Throw it out - it's unreasonable, because the money was paid for the material. Leave, hoping that over time, "useful" - to occupy a place in the garage. What remains? Which can be made.

Home products made of plastic pipes by their own hands: ventilation, irrigation system, screen, drain and borehole, ladder, pool, foundation, well, football gate

Plastic pipes - a useful material with a long useful life. What crafts of plastic pipes can be constructed using them? There are many options - the main desire.

Hanger and hangers for clothes in the style of minimalism

If after work there are extra meters left, you can make a clothes hanger. This will require:

• 5 parts, 2 m in length (preferably using products with a larger diameter to ensure stability);
• 6ps. adapters 90%;
• 2 pcs. plastic tees;
• hacksaw;
• scotch.

The cutter is cut as follows:

• 3 pcs. - 1,7 m;
• 2 pcs. - 1m;
• 4 things. - 0,3 m.

The construction is consistently assembled. To give a better fixation, we use an adhesive tape that is wound around the edges before inserting the cavity into the adapter. A hanger in the style of minimalism is ready.

Using small-sized remnants can make hangers for clothes.

1. If a small diameter pipe is available, cut it into three pieces. Two smaller, the third - 1/3 longer.
2. Take a twine or wire and pass through the details in such a way that an isosceles triangle is obtained.
3. If a wire was used, then its end is wrapped in a hook. The string is tied and fastened to the bar for clothes.

Arbor from plastic by own hands

Furniture, arch, gates

From pvc products you can design different furniture. It is light, mobile. Furniture made of plastic pipes with their own hands can be made by a person who does not have special skills. How to make a chair made of polypropylene pipes with your own hands?

To make an armchair with a backrest and a cloth seat it is required:

1. About 3m plastic pipe, 8 knees 90%, 6pcs. T-shaped joints.
2. Glue for work with PVC.
3. A saw with small teeth or a hacksaw for metal.
4. Cloth for the seat.

To make furniture from plastic pipes, you need to cut the parts to the required dimensions. For an adult, the dimensions are as follows: seat height - 450 mm, depth - 470-530, width 500-550. For a highchair, the dimensions are correspondingly smaller. After assembling a chair without to clearly represent the design. Next, you should hang the fabric and glue the components with glue. This is how the furniture made of PVC pipes is constructed with your own hands, which will become an ornament of your country house.

Using the method of the designer, you can make a swing from polypropylene pipes yourself.

Graceful with your own hands get using a drill. Applying a picture on the cavity, and making points on the contour, we get an interesting model. That the product does not fall apart and looked more interesting, it is recommended to make points not only through, but also translucent. If you fasten the foot to the base of the lamp, you will get a lamp from plastic pipes with your own hands.

Stylishly looks a partition of plastic pipes. The remains of the same color are taken. Using a hot method - glue gun or cold - glue for plastic, connect with each other. To the load-bearing wall, such a partition is fixed with self-tapping screws.

Flowerpot for flowers: a beautiful hand-made

You can decorate the interior of your apartment by making a few author's vases for flowers hanging on the wall. Such self-made plastic pipes look no worse than purchase vases.
  To implement the plan you will need:

• pipe diameter 8-10 inches;
• board;
• glue;
• bracket to clip on the wall;
• electric jig saw;
• ruler, marker;
• drill.

To get a stylish pot, the required height is measured and cut off. The resulting piece is cut into 2 parts, which are covered with a primer. Two pieces are cut from the board - one on the back of the pot, the other serves as the bottom. The parts are fixed at an angle of 90 degrees with screws. A part of the PVC pipe is fixed to the base with glue. To fix it was more reliable, use a clamp. After the glue dries, a bracket is attached to the back wall of the pot.

The original shelf-banquet for shoes will be obtained if you use a model with a diameter of 30 mm. The pipe, 3 m long, is cut into 10 parts, about 30 cm - for 42 shoes. The shelf is "pyramid" and fixed with glue. Bottom 4 parts, base and top - 3.

Onions: from soldering to assembling

To make a bow from a pvc pipe it is necessary:

1. Acquire a PVC sample marked with PVC SCH 40, not reinforced, with a wall thickness of 3 mm, an outer diameter of 26 mm. The length of the onion will be about 1.5 m.
2. Mark the center with a marker and on both sides of it 5 cm. This will be the handle. Put your hand, if not fit, make it wider.
3. A construction hair dryer warms up one half of the handle and is flattened with the help of boards and clamps. The same operation is repeated on the other side of the handle. The result is a curved construction.
4. The middle of the product is formed with a tack and a construction hair dryer. Clamped across and not flattened to the end.
5. From the edges measured 15 cm, put on an iron jar so that the mark was in the middle, heated by a hair dryer. Round the edge of the bank. The main thing is not to overheat, otherwise PVC will turn yellow and become brittle.
6. Along the edges, fastenings for the bowstring are made with a round file.

What crafts from PVC pipes can be made yet? Using scraps, the glue is made by an organizer, in which pencils, scissors, markers are placed. If you glue the workpieces together, you get an original frame for the mirror. Using a thin trimming, they make a stool or a stylish chair. Crafts made of polypropylene pipes are durable and durable, not requiring special care. The tree is made of plastic pipes. Cuttings of small length are glued to each other in the form of a Christmas tree. Subsequently, the construction is hung on the wall, in the holes are placed toys. Plastic crafts can be made by hand.

Products for poultry

Using the leftovers, you can get cheap household appliances. If there is poultry, a feeder for chickens from a plastic pipe is made as follows:

• Take 2 pipes, 30 and 50 cm long, the elbow, 2 caps. The long part will serve as the basis for the feeder, short for filling with grain.
• In the cavity, a length of 50 cm with a drill and a jig saw make holes 7 cm wide (so that the hen pokes its head).
• The parts are joined together by a knee, the plug closes on both sides.
• The feeder is installed in the coop. The grain is poured into a short tube, the long part serves for food intake.

The undoubted advantage of such a trough is that the chickens do not have the ability to scatter food.

Greenhouse (greenhouse) for growing vegetables: installation with polycarbonate

The made greenhouse of PVC pipes with its own hands is not inferior to the analogues sold. To make it fit the leftovers, even substandard. In addition, it is necessary to cut off iron fittings, for example, pins with a length of 60-70 cm. When buried, they must enter 30-40 cm into the ground. The wooden frame for the future greenhouse collapses.

Installation of the structure:

1. On the place where the greenhouse will stand, a wooden frame is installed. For greater strength is fixed in the corners of the reinforcement.
2. On the perimeter of the marking with a step of 50 cm is applied. According to the marks, iron pegs are driven into the ground to a depth of 20 cm. The pvc pipes with their own hands will be all the stronger, the smaller the step between the reinforcement.
3. Plastic pipes are put on the edges of the pins. For the reliability of the top are attached staples.
4. The center of the structure is attached along the entire length of another pipe. It will serve as an additional edge of rigidity.
5. The greenhouse is covered with a film.

For greater stability, the ends of the greenhouse are strengthened with plywood or fiberboard. The film should be selected high-quality. Ordinary tears from the gusts of the wind, because the design is not "tough." Collected greenhouses with their own hands from plastic pipes are cheaper than purchased analogs, and in addition, you can choose the appropriate size.

PVC pipes are a material that has a lot of non-standard uses in the farm. It is only necessary to show imagination and patience - and a lot of useful things are ready. A greenhouse made of plastic pipes with your own hands is easy, you just have to try.

A careful owner never discards the remnants of materials after repair. Even trimming pipes and the remaining excessively purchased fittings can be used. Crafts made of polypropylene pipes are a great way to realize your fantasies and make useful household items yourself.

Useful constructions for a garden site

Application of plastic pipes for the garden

The greenhouse made of polypropylene pipes will replace the obsolete structure made of wood or metal, requiring annual painting (the tree quickly rot and the metal rusts). Once you have built a frame of greenhouses made of polypropylene pipes, you can forget about the need for maintenance, repair and painting for many years to come. It is enough to stretch a new plastic film once a year and the greenhouse is ready for use.

Necessary materials:

• pipes of polypropylene of the required length (the number depends on the step of setting the arcs and the length of the future greenhouse);
• cement;
• sand;
• polyethylene film.

Stages of assembly:

1. Concrete one end of each pipe through the selected step (usually 1m).
2. Bend the fixed pipes.
3. Concrete the other end of each pipe.
4. If desired, it is possible to fix the arcs between each other with a longitudinal pipe using clamps. This will give the structure the necessary rigidity.

1. Cover the frame with a polyethylene film.

Homemade greenhouse made of polypropylene pipes can be made in another way, if you use tees made of PP for fastening pipes.

Polycarbonate can be used instead of the film. This will make the greenhouse more expensive, but it will not have to produce a constriction every year and buy a new film.

A hotbed of polypropylene pipes can be made collapsible. This design is convenient to harvest in spring, plant seedlings, and then, when the seedlings are planted in a permanent place, disassemble and store in a storage barn.

1. Prepare the pipes of the required length.
2. Bury in the ground bars from the metal through a certain selected step.
3. Put each tube on one end with a rod.
4. Bend each tube in an arc.
5. Put the other end of the pipe on the bar.
6. Tighten the film.

If there is not enough space on the site, polypropylene pipes are made of multi-level beds. The cross-sectional design can be in the form of a triangle or a rectangle.

Arrangement of multi-level beds:

1. There is a frame - a holder of beds from pipes of large or medium diameter.
2. Are made beds. For this, pipes made of large diameter PP are taken. From the horizontally located pipes, the top (less than half a diameter) is cut along the entire length. At the bottom, holes are drilled at regular intervals.
3. Pipe-beds are fixed to the frame.
4. At the bottom of the layer of drainage, and then a layer of earth.
5. Planted plants.

The main advantages of multi-layer beds:

• They occupy little space.
• The soil is not too humid, thanks to the holes in the lower part and the drainage layer. Plants do not get sick, roots do not rot.
• Plants do not shade each other.
• Ease of construction.
• Easy disassembly and assembly.
• Durability.

Making your own hands and installing a garden on the balcony, you will always have fresh greens to the table.

Plastic pavilions in the garden

The arrangement of outdoor pavilions places high demands on the material for manufacturing.

Requirements to the material:

• resistance to temperature changes;
• resistance to corrosion;
• moisture resistance;
• strength;
• small specific weight.

All these requirements are met by products made of polypropylene pipes.

Plastic furniture

Furniture made of polypropylene pipes is durable, as the service life of the material is about 50 years. Products are easy to obtain and are assembled quite simply. The main tool is a soldering iron for pipes.

Designer creative ideas will help to make stylish furniture that can decorate any room.

Furniture for children

It is usually difficult for young families to immediately withdraw from the budget a large sum for the purchase of finished furniture for the children's room. In addition, affordable furniture is cumbersome. An alternative is the self-assembled furniture made of pipes and connecting elements. The future owner can participate in the development of the sketch and assembly. Such furniture has all the advantages inherent in PP pipes.

Particularly suitable plastic furniture for cottages and recreation outside the city.

Shelves of pipes

The main element of the design are pipes and couplings. Shelf support - frame made of polypropylene pipes. On the holders you can install shelves from plywood, fixing them with screws. And you can use a structure without plywood. Books are placed directly on the holders, resting against the wall. If you are a fan of minimalism, then such bookshelves for you.

Highchair

Necessary materials and tools:

• pipes of medium diameter;
• fittings of the required configuration;
• plywood;
• foam rubber (optional);
• upholstery fabric;
• a hacksaw on wood;
• soldering iron for soldering plastic;
• a stapler for upholstery with staples (instead of a stapler with staples, you can use a hammer and small studs with washers from pieces of a plastic bottle);
• self-tapping screws.

Stages of manufacture:

1. From the pipes and fittings with the help of a soldering iron collect the legs.
2. From the plywood, cut out the square of the right size, put a piece of foam rubber on it and top the upholstery fabric. The piece of upholstery fabric should be larger in size so that it can be bent and stitched from the inside with staples using a stapler.
3. The seat is attached to the legs by screws.
4. You can also make a back.

Correctly made chair made of polypropylene pipes will be quite strong and comfortable.

Trivia for Usage

To make convenient organizers for all sorts of trifles, you need to pick up trimming pipes of the same diameter. One end can be cut at an angle for easy fixing.

Cutting large diameter pipes can be used to store shoes. Such shoe stands will save a lot of space in a small hallway, shoes will be stored not in the dump, and each pair will have its own cell.

A convenient multi-tier dryer for laundry is a necessary item in the household. If you make such a dryer from polypropylene pipes with your own hands, the resulting construction will be stable and reliable. It will not take away and will not overturn a gust of wind. Constantly staying in the open air, this design does not rust and does not rot, does not need any care.

The simplest product is the clothes hangers necessary for the household. For manufacturing, you need 3 pieces of pipe - 2 of the same length and 1 for a third longer. All three segments are strung on a strong cord. The ends of the twine must be tied. To the upper corner of an isosceles triangle, you can fix a hook from a wire, if it is near at hand. Otherwise, leave the end of the twine of the desired length. The hangers are ready.

Eco-friendliness, durability, lightness make polypropylene pipe articles popular. And the ease of installation will allow everyone, using a little imagination, to produce the necessary household item.

Today we will share with you the next useful ideas of country crafts made of ordinary plastic pipes, the remains of which since the appearance of the summer cottages probably are dusting somewhere in the attic.

In any case, the price of the issue here is simply incommensurable with the opportunities and inspiration that these affordable wonders of plumbing will give you.

Let's start, perhaps, with the utilitarian constructions intended for a garden and a kitchen garden.Greenhouses, greenhouses and lightweight frameworks for planting beds, assembled from polypropylene pipes and connecting elements are a very low-cost option, combining cheapness and simplicity of assembly. If necessary, just as easily dismantled.

In addition to the topic - strong and stable racks for growing and working with seedlings. Pipes of PVC, a larger diameter, gently peeled from the top with an electric jigsaw and filled with soil - a compact and aesthetic option for planting greens.

Crafts made of plastic pipes in the style of vertical landscaping of the terrace or decoration of the flower garden confirm that all ingenious is simple!

What can we say about the organization of a portable system of drip irrigation, irreplaceable for irrigation of a lawn or mobile structure for a watering hose. All the advantages are obvious!

No less important in the country economy are such small things as a woodburner, a garden trolley, a wicket or a stand for spinnings. Admit it, because it never occurred to you?

For the orderly storage of garden tools and tools - some more useful ideas, which are asked to implement them immediately.

The pieces of pipe attached to the wooden bar can serve as pencil stands. And vertically arranged cylinders can serve as supplies for tools. To prevent the tools from falling down, the bottom of the pipes can be sealed with a mounting foam.

Yes, we almost forgot about the parking lot for bicycles and scooters in case guests arrive. Plastic pipes are useful here!

At the dacha it is customary not only to work, but also to indulge in idleness. Simple garden furniture designs, assembled from polypropylene pipes, will help you to relax and relax in the shady corner of the garden.

Do you want a chair for babies from PVC pipes? This is entirely within our power!

You will need for the frame (I write in inches, not to adjust, who needs to translate, I would just use the in-line ruler):
   8 pieces of elbow
   6 T-pieces
   1 PVC pipe (choose good quality, durable) cut into 16 pieces:
   7 pieces per 10 inches
   2 pieces by 6 inches
   4 pieces per 4 inches
   4 pieces by 5 inches.
   For the seat:
   fabric 29.5 x 17.5 inches, middle seam 1/2 inch.

Sew on the long side. The seam is turned to the middle of the back side, but it's up to you.

The short sides are stitched, leaving a hole for eversion.

The short sides are turned 3 inches and are stuck.

To cut a pipe you will need a special scissors or a hacksaw / saw, and the best is a strong man with the necessary skills.

The cut parts are assembled according to this scheme.

You can paint, but after painting it was difficult to collect, the thickness of the pipe changed, so worth painting after assembly .
   It is said that 100% acetone wipes the inscriptions from the pipe.

How do you, for example, comfortable chairs? Choose for every taste!

And how do you like the garden swings?

A comfortable chaise longue, an improvised canopy for a morning meal in the open air, or is there such a model of a stand in the spirit of "lifhak" that allows you to train on a treadmill without leaving the Internet? Cheap, reliable and practical!

At the cottage we always need reliable shelves

Children at the dacha are a separate burning issue. The omnipresent children need to be given the opportunity to play and be disgraceful in such conditions that parents are at peace.

For kids right at the dacha you can collect here such a comfortable arena or a cozy toy house. These designs are easily transferred to the garden or to the veranda, and your child will always be in your field of vision.

Sorceresses older probably will like the game with water. Build such an impromptu "car wash" of plastic pipes, and the joy of the kids will not be the limit. By the way, a great way without compulsion is to wash the child, without driving him into a common shower.

Well, if you are talking about water procedures, take these useful ideas of dryers for towels and inflatable mattresses into service. Suddenly you have a pool on the site?

Finally, we offer you a few interesting ideas for the design of the country interior. Pay attention to the original coffee tables and a compact TV cabinet.

The rack is constructed of plastic pipes for storing laundry, clothes hangers and even two bunk beds. For masters of all trades there are no unconquered peaks!

If you cut PVC pipes with thin rings, you will get a universal ornamental material, from which will come out and a wonderful frame for the mirror, and a decorative partition. You will need glue, a stencil and a flat surface.

From small sections of pipes of a wide diameter, excellent shelving for storing shoes, towels in the bathroom, as well as pretty bottle holders are obtained. Or here's another, enchanting idea for the design of the hallway!

Creative and textured bookshelves, a hanger in the hallway or the simplest device for the dressing room, assembled from ordinary plastic tubes, is a great way to get rid of the routine and boredom at home.

And what, you thought this is all that can be created with the help of sanitary fixtures? No matter how! The top of engineering thought, we meet - table lamps and floor lamps. Unexpectedly, yes?

Well, and until you come to consciousness, another blow to the theory of Darwinism, - elegant floor lamps and lampshades from plastic pipes. And you weak?

We found such useful ideas of cottage dwellings from plastic pipes on the Internet. Inspire, go for it, and let technical progress help us!

What can be done from plastic pipes

The majority immediately raises the question: "Is it possible to replace PVC pipes with polypropylene pipes?". You can use polypropylene pipes, only in this case we still need a soldering iron.

Advantages of PVC pipes:
- Snow white color;
- to connect pipes with fittings can be with glue, or without it at all;
- if you do not use glue, the design will be collapsible, and like the LEGO designer, you can use fittings and pipes to assemble other structures.
Of course, polypropylene pipes are deprived of these advantages.

And now, let's see what crafts can be made from plastic pipes by hand:

From plastic pipes it is possible to make:

Highchair from 1 "pipe

Outdoor folding chair from 1 "pipe

Summer tables and chairs from 1 "pipe, for outdoor use

Greenhouses, greenhouses and lightweight frameworks for planting beds, assembled from polypropylene pipes and connecting elements are a very low-cost option, combining cheapness and simplicity of assembly. If necessary, just as easily dismantled.

Strong and stable racks for growing and working with seedlings.

Pipes of PVC, a larger diameter, gently peeled from the top with an electric jigsaw and filled with soil - a compact and aesthetic option for planting greens.

Children's 2-story bed (pipes 3/4 ", 1" and 1 1/4 "were used)

Bed for dogs, the diameter of the pipe in this case is chosen based on the size and weight of the dog.

Suspended swings for cottages

Sledges for chores in the winter in the country

From the remainder of large diameter pipes, you can make a small organizer in the garage

Clothes dryer made of PVC pipes.

Attaching, the wheels will get very comfortable trolleys.

A greenhouse made of PVC pipes will last you for many years, it does not have to be painted, and it will not rot or rust, as is usually the case with the greenhouses of their wood and metal.

From plastic pipes it is possible to collect hydroponics, but in this case I want to note that it is possible to use any pipes (including sewer pipes)

Children's car from plastic pipes

Or make a pen for chickens

Shelving, which can easily be assembled to any size

Demountable outdoor tents and tents made of plastic pipes

Grating for grapes from plastic pipes which will always have a pleasant appearance.

Sheds for cars made of plastic pipes

Fences and barriers made of plastic pipes

PVC pipes are easily accessible material for useful ideas and adaptations in the household. What do you need for this? Hacksaw, tape measure, glue, in some cases sandpaper.

1. Rack for drying clothes.

2. The system of drinking in the chicken coop.

3. The little boy.

4. Stelazhi.

5. Rack for bicycles.

6. A rack for containers with vegetables.

7. Summer velomobile.

8. Various tool holders.

10. For storing shoes.

11. Summer shower for children.

Simple garden furniture designs, assembled from polypropylene pipes, will help you to relax and relax in the shady corner of the garden.

How do you, for example, comfortable chairs?

A comfortable chaise longue, an improvised canopy for a morning meal in the open air, or is there such a model of a stand in the spirit of "lifhak" that allows you to train on a treadmill without leaving the Internet? Cheap, reliable and practical!

Children at the dacha are a separate burning issue. The omnipresent children need to be given the opportunity to play and be disgraceful in such conditions that parents are at peace.

For kids in the country, you can collect here such a comfortable arena or a cozy toy house. These designs are easily transferred to the garden or to the veranda, and your child will always be in your field of vision.

older women will certainly love the game of water.

House for games

As you can see, plastic pipes can be used in any industry (and not only for their intended purpose), but where exactly to use them depends on your imagination.

Jan 30, 2016 Halinka

Facebook

Twitter

In contact with

Classmates

Google+