Stainless steel sheet

Buy stainless steel sheets

The price of a stainless sheet depends on the required volume of products, the price of a sheet of stainless steel, the price list and account can be obtained from managers.

Sheet stainless steel   is made in accordance with GOST 5582-75. Stainless sheet can be corrosion-resistant, heat-resistant or heat-resistant, thick-plate and sheet-shaped and has in each case individual and features. We offer only high-quality stainless steel products meeting all standards and current standards.

For production of cold-rolled and hot-rolled stainless sheet, the steel of foreign manufacture of AISI 304, AISI 316T, AISI 316, AISI 409, AISI 321 and AISI 430 grades and domestic production of 08Х18Н9, 08Х18Н10, 08Х17, 08Х18Н10Т, 12Х18Н10Т grades is usually used. In this case, the surface of the product can be either polished, or matte or ground. The range of these types of rolled products corresponds to GOST 19903-74 (hot-rolled stainless sheet) and GOST 19904-90 (cold-rolled stainless sheet). Sheet steel is produced in accordance with the requirements of GOST 5582-75 and has a number of features. Produced in a cold way, thin steel has a thickness of 0.7 mm. If a hot method was used, the minimum thickness is increased to 1.5 mm. The maximum thickness of the sheet does not exceed 3.9 mm. Thin stainless sheets can be heat-resistant, heat-resistant and corrosion-resistant.

The standard cutting of the sheet has the following dimensions: 1000x2000, 1250x2500, 1500x3000 or 1500x6000, but custom-made sheets of non-standard sizes are available.

Stainless sheet price and price

Depending on the condition of the steel, the stainless sheet can be:

The flatness of a stainless sheet can be:

The edge by type can be:

• unedged (BUT);
• trimming (O).

The production of thick-gauge stainless steel is regulated by GOST 7350-77. The assortment of thick-gauge stainless steel is determined by the corresponding GOSTs for hot and cold rolled products. The main steel grades are 15X5M, 08x13, 08x17T, 14x17H2, etc. Dimensions: thickness of hot-rolled sheet - 4-50 mm, cold-rolled - 4-5 mm. The surface quality is determined by GOST 7350-77.

The surface of stainless sanded sheets according to the processing degree can be a reflective, glossy or super-mirror. The thickness of such a stainless sheet varies from 0.5 to 4 mm, cutting - 1000x2000 or 1250x2500 mm.

A corrugated sheet of stainless steel, like any other metal, can have the following variants of the riffles: a diamond - with one lentil or a rhombus, a blow - with two protuberances, a quintet - with five protuberances. The characteristics of this metal roll comply with GOST 8568-77.

The assortment of decorative stainless sheets is the largest surface treatment option that can have any texture and have applied etched patterns. Only for today it is possible to allocate about 40 kinds of decorative aluminum sheets. Dimensions: thickness - 0, -1.5 mm when cutting in 1250x2500 mm.

Perforated sheets derive their name from the perforation procedure, ie E punching through holes on a thin sheet of metal. The holes can be square round, triangular or oblong, and have different orientations relative to the plane of the sheet and to each other. Dimensions: thickness - 0,8-3 mm, cutting - 1250х2500 mm, 1000х2000 mm.

Sale of stainless sheets, sheet stainless steel

Due to high performance characteristics - strength, plasticity and resistance to negative environmental conditions and corrosive environments - stainless sheet is used in the national economy for the production of dishes, household appliances, as well as in the medical, chemical industry, construction and engineering.

Stainlless steel sheets | Buy a sheet of stainless steel (stainless steel) in Moscow - the price is inexpensive

Sheets of stainless steel in Moscow. Our address: 125424, Moscow, Shodnensky Tup., House No. 4, of.422

Phone fax: 8 (495 )772-45-79, E-mail:

Sheets of stainless steel | Buy stainless steel sheets in Moscow

Rolling of stainless sheet includes the following types of steel: plate steel, sheet steel, heat-resistant and heat-resistant steel, corrosion-resistant steel. Each of these types of steel has its own characteristics. Our company supplies a wide range of stainless steel products from leading manufacturers. The surface quality of stainless steel sheet strictly corresponds to GOST 5582-75.

Cold-rolled and hot-rolled stainless sheet

Stainless steel brands imported: AISI 304, AISI 316T, AISI 316, AISI 409, AISI 321 and AISI 430. The surface of the metal can be of three types: polished, matt or polished.

Stamps of domestic stainless steel: 08Х18Н9, 08Х18Н10, 08Х17, 08Х18Н10Т, 12Х18Н10Т and other brands. The rolled product range corresponds to the standards of GOST 19903-90 for hot-rolled and GOST 19904-90 for cold-rolled steel.

Stainless steel sheet | Thin sheet steel

Features of sheet steel (GOST 5582-75) consist in the fact that if it is made by hot method according to GOST 19904-90, then its minimum thickness is 1.5 mm. In cold-rolled steel (GOST 19903-74), the minimum thickness is 0.7 mm. The maximum thickness of sheet steel can not exceed 3.9 mm.

Thin sheet steel can be heat-resistant and heat-resistant, as well as corrosion-resistant. The stainless sheet has a standard cutting of 1500x3000, 1250x2500, 1000x2000, 1500x6000. According to the agreement, it is possible to supply a sheet of another cut. In the range there is also stainless steel sheet in rolls.

Stainlless steel sheets | Classification

• On the state of the material, the sheets are divided into:
  • М4в (cold-rolled soft with thermal processing);
  • PN1 (semi-working   cold-rolled);
  • Н1 (cold-worked cold-worked);
  • M2a, M3a and M4a (etched, cold-rolled, thermally treated);
  • M2b, M3b, M4b and M5b (hot-rolled soft, etched heat-treated);
  • M5v (heat-treated   cold-rolled);
  • M5g (untreated, heat-treated hot-rolled);
  • 5d (uncoated hot-rolled sheet without heat treatment).
• Depending on the flatness:
  • PN - normal flatness;
  • ON - especially high flatness;
  • PU - improved flatness;
  • PV - high flatness.
• Depending on the rolling accuracy:
  • And with increased accuracy;
  • B - with normal accuracy.
• By edge type:
  • BUT unedged edge;
  • About the edging.

Sheet of stainless steel | Stainless Steel

The range of thick steel corresponds to GOST 19903-74 (for hot-rolled products) and GOST 19904-74 (for cold rolled products). The thickness of hot-rolled steel is 4-50 mm, and of cold-rolled steel - 4-5 mm. Thick steel is produced in accordance with GOST 7350-77, the chemical composition of grade 15H5M corresponds to GOST 20072-74 and GOST 20072-7. In the production of stainless steel sheet, the following steel grades are used: 08 × 13, 08 × 17T, 14 × 17H2, etc. The quality of the surface of stainless steel sheets strictly corresponds to GOST 7350-77.

Stainless steel sheet polished and mirror

Our company supplies stainless steel sheets AISI 430 and AISI 304 in various packages. Depending on the degree of processing, the surface of rolled metal is divided into a reflecting (2R, BA), glossy (2B), super-mirror (8N). The thickness of the sheet is from 0.5 to 4 mm. Standard cutting: 1000х2000 mm, 1250х2500 mm.

Stainless corrugated sheet

Stainless corrugated sheet is widely used in architecture and construction, in the automotive industry and food industry, it is used for the production of floor coverings, decorative elements. The surface of the corrugated sheet is covered with corrugations that form a convex pattern. The product "lentils" has 1 riffle, "duet" - 2 riffles, "quintet" - 5 riffles. Specifications meet GOST 8568-77.

Stainless steel sheet | Decorative sheet metal

Decorative steel can have a wide variety of surface treatments. It can have various etched patterns and textures. There are about forty of its ornamental species. Decorative sheet metal is used for facing buildings and structures. Stainless sheet AISI 304 has a textured surface Deco 1-17, AN 2-6. Any variant of decorative stamping is expressed in a rather tangible figure. The thickness of the sheet steel is 0.8 - 1.5 mm, the standard cutting is 1250x2500 mm.

Stainless perforated sheet

We offer the supply of sheet metal 12Х18Н10Т, AISI 304 with triangular, round and square holes. Under the order possible delivery of standard and original perforation. The thickness of sheet metal is 0.8 - 3 mm. Standard cutting options: 1250x2500 mm and 1000x2000 mm.

Application of sheet stainless steel

The stainless sheet has a high resistance to corrosion, strength and ductility. Such a sheet is easy to process, weld, and also durable in use. Sheet metal is widely used in the national economy, for the manufacture of dishes and various household appliances, and also the sheet is used in construction, mechanical engineering, in the chemical and medical industries.

By calling our managers, you can order any assortment of stainless steel sheets at affordable prices. In addition, we offer delivery in Moscow and the region, as well as cutting the metal in size. In order to find out the price and place an order, please contact our managers. Delivery of metal products is made as soon as possible. The range of our rolled metal includes high-quality stainless steel in rolls and sheets. Depending on the customer's needs, stainless sheet metal can be processed: bending. Grinding and cutting into size.

In order to buy a stainless sheet, as well as get more information, contact our managers.

Stainless steel sheet 60mm Price of Suppliers of your Region! Steel (st) - 08Х18Н10, 08Х17, 12Х18Н10Т, 20Х13Н4Г9, AISI 430, AISI 321, AISI 304

In order to obtain the required information, you need to select the Stainless sheet from the main page in the section "Stainless steel", then select the required size in the drop-down list - you will see a table in which you can see the characteristics with the type of steel, size or phone number of the Supplier declaring availability of position - Stainless sheet 60 mm st. AISI 310, 08Х18Н10, 08Х18Н10 in stock, in a warehouse in the "Moscow" region.

High and constantly rising prices for rolled metal in the city of Moscow, cause the need to create an information resource that allows you to analyze the metal market with the most reliable data, such as the price and availability of one or another range of products of metallurgy. The main objective of the project is to provide the Buyer and the Supplier with reliable information on the prices for rolled metal in the selected region of the Russian Federation and CIS countries

The unified metallurgical portal site is a software resource based on modern technologies, the main task of which is to provide up-to-date information about the state of the metal rolling market of users from the city in the city of Moscow, as well as all Regions of the Russian Federation and CIS countries. Daily updated information allows you to track the trends in the metallurgical industry as a whole, and in the context of any single type of rolled metal product range, as well as for a single size.

To organize a mini tender for the purchase of rolled metal in the Moscow Region, there is no need to ring up and learn the prices of each supplier, you just go to the section "Buyers' requests" and fill out the purchase order. A convenient menu with a drop-down list will allow you to send a request (application) to a stainless sheet 60 within a few minutes. More than 2000 organizations of the Russian Federation and CIS countries are subscribed to this mailing list. Such a system actually provides you with a daily market analysis. Do not buy expensive! Find out the real price!

A convenient navigation portal is created specifically for the convenience of users who want to buy a certain type of steel products and for suppliers - metal traders tracking the change in demand and supply of the main suppliers of your region. For example, in order to know the information on request - Sheet nzh 60 mm price in Moscow GOST 5582-75 GOST 19903-74 GOST 19904-90.

Convenient automatic system for placing an application for the purchase of metal or a tender for metal rolling in the "Moscow" region, allows the buyer or the supplier of rolled metal products to independently place a tender for a stainless sheet 60. The buyer will then receive prices or quotes for metal rolling in the selected region , terms of delivery and names of producers.

A wide range of steel and stainless rolled products presented by our portal, easy and intuitive navigation, a single menu for all sections of the range of rolled metal provides the visitor a convenient service for buying the sale of products of the metallurgical industry. Provides a full answer to users' queries Yandex - Stainless sheet 60 mm price or Stainless sheet 60 buy in Moscow